Choose your device
One device, one connection path. You only need your device’s instructions.
Before you start
You need an active university SSO account and its password. Do not enter account details on this page.
In this guide
Connection steps — Windows
- Select the network
Turn Wi-Fi on and select “ilam-uni-ap”.
- Start the connection
Enable “Connect automatically” and select “Connect”.
- Use your university account
Enter your SSO username without a domain, and your account password.
- Verify the certificate
If “Continue connecting?” or a server certificate appears, verify the university certificate through a trusted channel before selecting “Connect”.
- Complete the connection
After authentication, internet and authorized internal resources are directly available.
Check the connection
- Network connection: check that Wi-Fi settings show a connection to ilam-uni-ap.
- Internet: open a public HTTPS website. Opening an internal university service alone does not confirm internet access.
- Internal service: if you need a university service, test that authorized service separately. Never ignore a certificate warning.
Advanced settings and notes
| Setting | Value |
|---|---|
| SSID | ilam-uni-ap |
| IP / Gateway / DNS | Automatic / DHCP |
| Auto-connect / Auto-Join | On |
| IEEE | 802.1X |
| EAP | PEAP |
| Inner authentication | EAP-MSCHAPv2 |
| Username | SSO username only: no domain, email suffix or @ |
| Password | SSO password |
| Random Hardware Addresses | IT confirmation required; keep the current setting |
The reported configuration does not require manual CA installation for this method on personal devices. This does not justify accepting unknown certificates.
Forget the saved Windows connection
Windows 11: Settings → Network & internet → Wi-Fi → Manage known networks → ilam-uni-ap → Forget
Windows 10: Settings → Network & Internet → Wi-Fi → Manage known networks → ilam-uni-ap → Forget
Labels may vary between versions. After a password change, enter the new password first; forget the network only if problems persist.
More information: devices, NAC and privacy
Under the reported configuration, the same network name is used in university buildings and dormitories. Authorized access is provided directly after authentication; no captive portal or VPN is required for this connection. User groups include students, faculty, staff, IT specialists, guests and contractors. Under the reported policy there is no device-count limit per SSO account. NAC identifies devices automatically after authentication; no manual MAC registration is needed. Enable automatic connection.
Guests and contractors
The host unit’s representative must submit a request for a temporary SSO account through the administrative automation system. The request must include name, identity reference, employer, host unit, validity dates, phone number and access purpose. IT creates the account and sends credentials to the guest by SMS. Validity follows the requested dates; extension requires a new host request. Do not enter these details on this guide site.
Troubleshooting
Troubleshoot Wi-Fi one step at a time
Network name is not visible
Turn Wi-Fi off and on, and check network coverage at your location. If the problem persists, submit a support request with the building and location.
Incorrect username or password
Enter only your SSO username; do not add a domain or email suffix. Then check your password. Use the recovery link below if needed.
Cannot connect
Check device settings and the official certificate. For Android PEAP, set MAC address type to Phone MAC as specified in the PDF. For other devices, do not change MAC settings without IT confirmation. Forget and reconnect if needed; never ignore a certificate warning.
Connected but no internet
Disconnect and reconnect. Then check that IP and DNS settings are obtained automatically through DHCP, and test the connection again. If the problem persists, submit a support request.
After changing the SSO password
Enter the new password when prompted. If the problem persists, forget the network and reconnect.
Slow or intermittent connection
Try another location and report the building, floor, location and time.
Get help
Support route and verification limits
Contact the IT Center to confirm the correct ticket portal, sign-in method and category. Tickets and telephone calls are answered during office hours.
Images and guide downloads
The visual PDFs are the basis for the Android connection steps. Menu labels may vary by Android version; see the guide for certificate compatibility and security notes.
Sources and review status
Last text review: 3 October 2026
Editorial responsibility: Supplementary guide editorial team · University technical approval: not received; technical owner not designated
Next planned review: 2 November 2026
Official wireless guide and Windows connection files (Legacy source; a working original address has not been verified)
A university source link does not establish that all settings and policies are current.
To print, expand the sections you need and use your browser’s Print option. To share, copy this page’s address.